-
Conway’s Law, DevOps, and Your Source Code
The layout of your source code repositories will affect your company’s org chart, and if you get the first wrong, your ability to deliver software will suffer. Conway’s Law states that your software architecture will naturally match your company’s org chart. I expand the law and believe that your source code repository structure will naturally…
-
The Little Village That Could
The windows rattled, that one picture hanging on the wall tilted again, our conversation stopped. We did not notice. Growing up beside a busy Canadian National railway, trains were a part of life. The engineers blew their whistles as they approached the road crossing, and the roar of the diesel engines as they made their…
-
Writing Code is the Same Thing as Writing Prose
The act of writing Code and writing Prose is the same. They both use the same mental processes, have language constructs and audiences, and require significant focus to be effective. I’ve written code and countless technical docs and articles for well over two decades, and lately started writing fiction. This article has been percolating in…
-
A very long overdue update on rebuilding the Richardson
It has been five years since my last update. Replacing those ribs was extremely time consuming, each one was a three hour commitment needing helpers, and life just gets in the way. But it’s finally done, and my daughters will never willingly crawl under a boat again. On the right is a picture of the…
-
Slow progress
After an extended break due to other priorities, I’m back at slowly installing more ribs. On the right is the back section of the boat with seven new ribs in a row. It’s exciting to see a small section that’s completely held together with new ribs. We broke three ribs trying to get the last one…
-
Rib Fest!
With my Dad’s help, and that of his well equipped shop, we manufactured almost 60 ribs for the boat, close to 500′ worth of ribs! I first ran the 1″ planks through the bandsaw and ended up with (mostly) straight strips of 1″ x 1/2″ by 8′ long ribs. One pass on each side through…
-
Stem and Transom
Finally some new wood went into this boat. I took a day off last week and installed the new stem and keel. I don’t have a good picture but it certainly feels like we’re making some progress. The keel and stem are nailed from the bottom, and every hole has to be drilled for the copper…
-
First bend
First bend was successful, here’s a gratuitous picture of the wood on the form. It bent quite easily after fifteeen minutes of steaming, 1/4″ thick. You can never own enough clamps!
-
Bending a new stem
The past few weeks have not been great in terms of boat restoration. Every project has its highs and lows, and last weekend saw the project in a state of despair. Lighting a match under the boat seemed like a viable option. Before I get into details, I purchased some quarter-sawn white oak for the…
-
Rotten stem and keel
I finished stripping the bottom a few weeks ago, which uncovered some “interesting” prior repairs, some of which need to be redone. The hole is quite obvious, and now that the outer keel and outer stem are gone, the rot to stem and inner keel are really obvious. I managed to carefully pry out the…
-
Stripping
Here’s the stripper hard at work. I really dislike using chemicals but this stuff is amazing. Put it in, wait 15 minutes, and 49 years if paint scrapes neatly off (with a bit if muscle). Scraping with a sprained wrist really sucks though.
-
The mess that is the bow
After taking the remaining bits of metal off that someone had used to repair the bow, I found a mess. And a hole. Both were expected. The inner and outer stem, as well as the keel are all rotten and need to be replaced. This is turning into a rather large project.
-
My new (to me) boat
I recently came into ownership of a 1965 Richardson Avalon 14′ cedarstrip boat. The history of the manufacturer is somewhat cloudy, but it appears in 1962 the former General Manager of Peterborough Canoe Company, the company that built most of the cedar strip runabouts, bought Lakefield Boat Co and renamed it to Richardson Aquacraft, also Rilco…
-
Popup Trailer Roof Repair Part 2
Fixing a rotten roof is an incredible amount of work. After taking the rotten parts off, the horizontal part of the roof is solid, as is the vertical side on the driver-side. The passenger side is entirely rotted out, see this picture for how bad it is. This is a picture looking at the top…
-
Popup Trailer Roof Repair
After seeing some odd spots on the roof of my tent trailer, some exploratory surgery showed that the back, front and side of the roof are completely rotten. A new roof will take more than eight weeks to order, and cost aside that puts a damper on the planned East Coast trip on August. So…
-
BB10 – Google Accounts
Setting up Google Mail works well, but the calendar doesn’t always sync. This is an intermittent issue reported on this thread, and reported in KB33458. About the fifth entry down in the thread is a workaround that worked very well for me, steps repeated here for convenience: Remove the previous gmail accounts. Click on the…
-
BlackBerry 10 Tips – Sorting Facebook Feeds
I picked up a new BlackBerry Z10 yesterday. The device is very nice, but a completely different beast than the old BlackBerry. Because of that, there are a lot of questions on how to tweak various settings, and not many answers. Question: The Facebook apps appears to be sorting by “Top Stories” instead of “Most…
-
Canoe update – June
A few more pictures available. I’ve got the fibreglass and epoxy on the inside, it only needs a final sanding and then installation of gunwales, seats and decks. I did have some help sanding it… From Canoe – Stage 2 From Canoe – Stage 2 Here it is. I love the dark accents, they came…
-
Art website
My favourite artist now has a website! Have a look at www.jodiehart.ca.
-
WordPress on Mac
I’ve been banging my head against the wall for the past day, trying to figure out why my wordpress install on my Mac doesn’t talk to the database. Setup is simple, enable the built-in apache web server, install the Mac Mysql server and setup as per the wordpress instructions. . But When you’re on Linux…